Categories
ระบบไฟ

โมดูลชาร์จ

โมดูลชาร์จเร็ว จากไฟ 12v-24v เป็น USB fast charge QC3.0 4-way fast charge module 12V24V to QC3.0 fast charge single USB mobile phone charging board supports Apple Huawei FCP

รายละเอียดสินค้า โมดูลชาร์จเร็ว จากไฟ 12v-24v เป็น USB fast charge QC3.0 4-way fast charge module 12V24V to QC3.0 fast charge single USB mobile phone charging board supports Apple Huawei FCP

1. All modules support fast charging, and each channel has independent chip control.

Each independent input capacitor and independent power storage output capacitor, integrated inductor, independent self-recovery fuse, four independent output.

2. Each channel supports QC 3.0 fast charge protocol, can support fast charging at the same time, can output 5V 9V 12V (requires mobile phone protocol support). Current consumption 96W, PCB adopt FR-4 1.6mm, plate thickness adjustable layout design and heat-tight layout design, rear window full-load working temperature is low, standby current is 0.013A, the module has output voltage compensation function. NS

feature:

– Built-in synchronous converter buck switch chip

– Offset wired output voltage

– The output has CV/CC feature (output current is less than the CV output mode preset value; Output current is greater than the set value, output mode CC)

– Conversion efficiency up to 97%

– soft start function

– Output over current, input over voltage, input under voltage, output short circuit protection.

– ESD 4KV, DC withstand voltage 48V

Specifications:

Input voltage range: 4.5V to 32V (input voltage must be higher than output voltage because it is a voltage drop type module)

Output voltage range: 3V to 12V (automatically adjust according to fast charging protocol)

Output power: Max. 24W (4V3.6A, 5V3.4A, 9V2.5A, 12V2A, etc.)

Switch frequency: 220Khz

Fast Charging:

1. Support BC1.2, Apple, Samsung agreement.

2. Support Qualcomm QC2.0 and QC3.0

3. Support MTK PE1.1/PE2.0

4. Support Huawei Fast Charge Protocol FCP

5. Support Samsung, AFC fast charge agreement.

6. Support Spreadtrum fast charge protocol

Application: Car charger, fast charger adapter, smart socket, solar charger, etc.

Note:

1. This module is a 4 channel fast voltage charging module, please use 12V-30V DC power supply, the positive and negative poles can not be reversed.

2. The purchase of equipment requires a certain amount of practicality, and the module requires solder wire.

Included in the list:

1 x 4 slots USB 12V 24V fast charge module